Commercial Entry Matting Systems Melbourne
The first three metres inside your building entrance is where 80% of dirt, moisture, and debris is deposited from foot traffic. Without effective entry matting, that contamination is carried throughout your building, accelerating wear on interior floors, increasing cleaning costs, and creating slip hazards.
Commercial Floors supplies and installs commercial-grade entry matting systems for building foyers, lobbies, reception areas, and covered entry points across Melbourne and Victoria. Properly specified entry matting pays for itself many times over through reduced maintenance and extended floor life.
Types of Entry Matting
Recessed Mat Wells
Installed flush with the surrounding floor surface in a purpose-built recess. Creates a clean, unobtrusive look and eliminates trip hazards. The preferred solution for new builds and major renovations.
Surface-Mounted Mats
Placed on top of existing flooring with bevelled edges to prevent tripping. A practical, cost-effective retrofit solution for existing buildings.
Aluminium Grid Systems
Heavy-duty aluminium frames with replaceable carpet or rubber inserts. Ideal for very high-traffic entrances such as shopping centres, hospitals, and transport hubs.
Carpet Tile Entrance Zones
Using heavy-duty, high-pile carpet tiles in entrance areas to create an integrated dirt-trapping zone that visually blends with the main floor covering.
Why Entry Matting Matters for Commercial Buildings
Protects Interior Floors
Entry matting traps abrasive grit that would otherwise scratch and damage vinyl, LVP, and carpet surfaces. This can extend the life of your main flooring by 30-50%.
Reduces Cleaning Costs
Less dirt entering the building means less frequent deep cleaning, lower chemical usage, and reduced labour hours for cleaning staff.
Improves Safety
Wet feet on smooth lobby floors create slip hazards. Entry matting absorbs moisture and provides traction, reducing the risk of slips and falls.
Enhances Appearance
A clean, well-maintained entrance creates a positive first impression for visitors, clients, and tenants.
Frequently Asked Questions
How long should entry matting be?
Industry best practice recommends a minimum of 3 metres (approximately 6 footsteps) of entry matting to effectively remove the majority of dirt and moisture from footwear. For very high-traffic buildings, 4 to 6 metres is recommended.
Can entry matting be installed in existing buildings?
Yes. Surface-mounted entry mats with bevelled edges can be placed in any existing foyer or entrance. For a more permanent, flush-fitting solution, recessed mat wells can be installed during renovation or refurbishment.
How much does commercial entry matting cost?
Entry matting costs vary widely depending on the type: surface-mounted mats from $50-$150/m², recessed systems from $150-$350/m², and aluminium grid systems from $250-$500/m². The investment typically pays for itself through reduced interior floor maintenance within 12 to 24 months.
Get a Free Quote Today
Call us on 0419 810 810 or request a free measure and quote. We come to you — anywhere in Melbourne and regional Victoria.
